Provide high-quality products and excellent services to customers around the world.

Shandong Aifule Precision Bearing Co., Ltd.

LANGUAGE
- English
- Русский

language

Home page

51412 Thrust Ball Bearing

Thrust ball bearings are designed to take axial (thrust) loads at high speeds, but they cannot take any radial loads. These bearings feature bearing washers with raceway grooves in which the balls move.

CATEGORY：

Thrust Ball Bearings

+86-18396893528

sdafl@cn-aflbearing.com

Message

Related Products

Product Description

Keywords：

51412 Thrust Ball Bearing

Structure:

The thrust ball bearing is composed of race,shaft washer and steel ball retainer.The one that matches with the axis is called washer.The one that matches with the shell is called the ring.

Thrust ball bearing is a kind of separation bearing. The shaft ring and seat ring can be separated from the cage and steel ball components.

Thrust ball bearing is designed to withstand thrust load at high speed and is composed of a gasket-shaped ring with a ball rolling groove.Owing to its cushion-shape ring,the thrust ball bearing is divided into flat-base cushion type and aligning spherical surface cushion type.

Bearing role:

Its role should be to support, that is, literal interpretation used to bear the shaft, but this is only a part of its role, support its essence is able to bear radial load.

The lubrication method of bearings is divided into grease lubrication and oil lubrication. In order to make the bearing function well, first of all, it is necessary to choose the lubrication method suitable for the use conditions and purposes. If only lubrication is considered, the lubricity of oil lubrication prevails.

Main applications of thrust ball bearing:

Crane hook, vertical water pump, vertical centrifuge, jack, low speed reducer, etc.

There are two key points in the assembly of thrust ball bearings. One is the control of the pressing quality of the cage and the steel ball, and the other is the control of the nominal height T after the assembly of the bearing. In addition, since the shaft ring and the seat ring can be separated, there is a management problem. It is to prevent the mixing of imported bearing parts. The M-type press cage uses a curved edge assembly die. After pressing, the steel ball is required to rotate flexibly in the pocket hole, but it can not fall off from the pocket hole, and the technical procedure to check the momentum of the steel ball in the pocket hole. If the solid cage is imprinted too deeply, the momentum of the steel ball will be small, and the connection between the embodiments and the cage is too little and the strength is insufficient, which is easy to fall off and cause the cage to be scrapped.

Small thrust ball bearing seat ring and shaft ring inner diameter size difference is very small, there is no obvious difference between the two bundles. In order to prevent the phenomenon of mixed sleeves, that is, a set of bearings installed are found to be both seat rings or shaft rings. This requires certain measures. Usually, the drawing ring and the seat group are distinguished by auxiliary tooling when the set is closed, or the inner diameter plug gauge is used to check the inner diameter size before sampling the nominal height. In order to check the inner diameter, the seat ring is placed below and the shaft ring is placed above. If the inner diameter of the seat has obvious quenching heating oxidation color or is not grinding, there is no need to test the inner diameter size, and the difference between the shaft ring and the seat can be clearly seen, and it is not easy to mix. After assembling the thrust ball bearing, the nominal height T should be measured to confirm whether it is qualified. When measuring, calibrate with height block or standard parts, and measure the load, the bearing needs to rotate dozens of times, and be sure to reach the minimum height.

OUR FACTORY

We specialize in providing forklift bearings, deep groove ball bearings, self-aligning ball bearings, self-aligning roller bearings, cylindrical roller bearings, tapered roller bearings, wheel hub bearings, agricultural machinery bearings, etc.

PRODUCT TESTING

We use advanced equipment to conduct strict quality inspection to ensure product quality.

PACKING AND DELIVERY

Sufficient stock for quick shipment.

CUSTOMER CHAT

Our professional service team provides you with the best service experience.

THE ADVANTAGES OF CHOOSING AIFULE

Whether you require standard bearing solutions or customized designs, we are here to meet your needs and support your success. Partner with us, and experience the Aifule difference in precision bearing solutions.

SPECIAL DISCOUNTS

QUALITY ASSURANCE

PROFESSIONAL SERVICES

VERY FAST SHIPPING

FAQ

Can we take some samples? Any fees?

Yes, we can provide samples free of charge, but we don't pay for shipping. If you place an order after confirming the sample, we will refund your delivery fee or deduct it from the order amount.

Can I visit your factory?

Of course. We welcome customers from all over the world to visit our factory.

Are you a trading company or a manufacturer?

We are a professional bearing production company, but also a very professional bearing trading company Product. We can also provide all kinds of bearing products.

How do you make our business relationship good in the long run?

1. We maintain good quality and competitive prices to ensure the benefit of our customers. 2. We treat every customer as a friend, no matter where they come from, we sincerely do business with them and make friends.

Thrust Ball Bearings