Provide high-quality products and excellent services to customers around the world.
-
PRODUCT
-
PRODUCT
E1 type spherical roller bearing
Type E1 cage E is a reinforced type with higher load capacity. E1 is unique to X-LIFE and represents long life. The E1 type retainer is guided by an outer ring with a retaining ring in the middle, and in spherical rollers, it also represents an oil groove and oil hole
EAE4 type spherical roller bearing
The latest design adopts symmetrical spherical rollers, two-piece quenched steel stamped cages, and the inner ring has no ribs. Features: The cage used in EAE4 bearings has its own guiding function, which effectively reduces the friction caused by the guide ring and reduces noise on the basis of E-type bearings. The high speed and low noise brought by low torque are the biggest features of EAE4 bearings.
Single Row Spherical Roller Bearings
Single row spherical roller bearing adopts spherical roller, outer ring raceway is spherical, has self-aligning performance, can bear radial load and axial load, is a new type of simple structure, large dynamic load capacity, convenient installation and use Structural bearings.
CCJA type spherical roller bearing
The CCJA type is a spherical roller bearing for vibrating screens. It consists of an outer ring, an inner ring, asymmetric rollers and a cage. There is a cage on the upper part of the inner ring, and asymmetric rollers are installed on the cage. The upper part of the cage is the outer ring; the bottom of each cage is equipped with a slope structure. The height of the slope structure is 0.4~0.6 times the thickness of the cage. The angle of the slope structure is 10~15°. The cage is an inner-guided MB spherical roller bearing. Cage or externally guided MB spherical roller bearing cage. The spherical roller bearing for vibrating screens of this utility model is designed with a slope structure at the bottom of each cage, which can effectively store lubricating oil (grease). Between the two cages, it is more convenient for the lubrication inside the bearing. It can prevent the bearing from dry friction at the bottom of the two cages under high-speed, vibration, and impact conditions, which greatly improves the service life of the cage. It improves the life reliability of the new vibrating screen bearing and meets the needs of customers to the greatest extent.
Rod end joint bearing is a joint bearing with a rod end or mounted on the rod end, which belongs to a category of joint bearings. The spherical plain bearing is a spherical sliding bearing. The basic type is composed of inner and outer rings with spherical sliding spherical contact surfaces, which can withstand large loads.
GE Type Radial Spherical Plain Bearing
The spherical plain bearing is a spherical sliding bearing, and the sliding contact surface is an inner spherical surface and an outer spherical surface, which can rotate and swing at any angle during movement.
Rod end joint bearing is a joint bearing with a rod end or mounted on the rod end, which belongs to a category of joint bearings. The spherical plain bearing is a spherical sliding bearing. The basic type is composed of inner and outer rings with spherical sliding spherical contact surfaces, which can withstand large loads.
Thrust Tapered Roller Bearings
Axial tapered roller bearings can form a very compact bearing arrangement in the axial direction, which can withstand heavy axial loads and is rigid.
80000 Type (Thrust Cylindrical Roller Bearing）
Type 80000 thrust bearing is a thrust roller bearing that can withstand axial loads in one direction. Its axial load capacity is much larger than that of thrust ball bearings, with high rigidity and small axial space. Thrust cylindrical roller bearings and thrust needle roller bearings are suitable for applications with low rotational speed, and the rotational speed of thrust cylindrical roller bearings is slightly lower than that of thrust tapered roller bearings.
Double direction thrust ball bearing
Two-ways thrust ball bearings consist of a shaft washer, two races and two steel ball cage assemblies. The bearing is a split type, and each part can be installed independently. Two-way and one-way bearings use the same shaft washer, seat washer and ball cage assembly.
CONTACT US
Address:Room 2-A010, Building 26, Zone 3, Times Headquarters Base, No. 15, Lanxiang Road, Tianqiao District, Jinan City, Shandong Province
PRODUCTS
◆
◆
Copyright © Shandong Aifule Precision Bearing Co., Ltd.